Orlandoo OH35A01 DIY Parts Petrol Engine Simulation of sound
Dimension
- Brand Name: Orlandoo
- Item Name: OH35A01
- Item Type: Petrol Engine Simulation of sound sc0002
- Scale: 1/35
- Plug and Play
- Sound quality: 22.05 kHz
- RAM：4M
- Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V.More than to burn the built-in amplifier and the microcontroller, if the ESC is the BEC
Is 6V, the proposed series of 2 2A rectifier diode from the receiver to the power, the voltage drop of 1.2-1.4V, to the sound group power supply.
Output power: 1W8 ohm 5V / 0.6 W8 ohm 3V
Neutral point setting
- Power on transmitter and receiver. LED blinks fast -> normal mode. Bring throttle stick to idle. Motor must not move.
- Bridge study switch for about 0.5 seconds until beep -> LED cont. on.At this moment the idle position of the throttle stick is stored.
- Move throttle stick to your desired acceleration point (throttle stick position where idle dead band stops and engine running sound starts) and wait for a beep. Now the dead (neutral) band of the speed channel is defined.
- Move the throttle stick to full speed position and wait for three beeps. After this the sound unit is back in the normal operation mode.
Package Contents
- 1 x Petrol Engine Simulation of sound
- 1 x Small speakers
没有评论:
发表评论